How to Use a Bore Snake to Clean the Gun Effectively

Most of the time, you would be looking to clean your gun after using it for a while. It is always important that you get to pick the right method for cleaning so that you do not have any trouble keeping it clean. Different methods exist, but it seems many people are getting attracted to using a bore snake for cleaning their guns. If you are new to using a bore snake, do not worry as we get to highlight some of the important tips on how to use a bore snake.

​What you’ll need

  • Gun
  • Bore snake

1. Choosing the best bore snake

It is possible to find different products coming from different manufacturers all looking to sell their products. It would be important to pick the best bore snake for cleaning the rifle and pistol. The Hoppe’s product is often seen as the best and will get the job done easily. For those who have used it, they agree that it can help in replacing the tiresome use of the patch to clean the gun.

2. Apply the solvent onto the bore snake

As part of lubricating the bore snake, you need to apply the Hoppe’s solvent. Make sure to apply the solvent to the floss region found on the bore snake.

Proceed to drop the brass end into the breech of your pistol gun. The brass end should easily go through the pistol barrel and emerge on the other size. The first floss area on the bore snake will help remove the loose particles in the barrel.

3. Keep pulling the bore snake

Source: http://item.brownells.com/

You have to make sure that the whole length of the bore snake gets to go through the barrel. With the first floss part having removed the loose particles, the embedded bronze part will be important for scrubbing the residue in the barrel. The scrubbing is possible as the bronze part is made to work as a brush.

With the fouling and residue removed, the remaining part of the bore snake will now swab the entire length of the barrel. The best part about this process is that it can be done in a single pull of the bore snake through the barrel.

4. Finishing up cleaning

The first part was cleaning with Hoppe’s solvent, but now you get to clean without it as a way of finishing. Clean the barrel with the bore snake about twice without using the solvent this time.

By now you should see that the barrel is all cleaned up and still shining. The process is simple and anyone can do it. You can always now go ahead to shoot with confidence knowing that your gun is cleaned up and will work great.

Below is an important video that could help you to learn more about cleaning with a bore snake.

​Conclusion

Comparing cleaning a pistol with a bore snake to the conventional method of using a brush, you can see that a bore snake is always better. You can end up having the best-cleaned gun around when you choose a bore snake. Always make sure that you get the right bore snake at all times.

Click Here to Leave a Comment Below 0 comments