Ask anyone who is into rifles about the best ammunition and the .17 caliber will never miss on the list. The ammunition has received praises from different users over time since it was first introduced. The caliber is not just about praise and not delivery, as it is seen to be the most accurate caliber for over decades now. For someone looking to take shots at a range of 200 to 400 yards, then you may want to opt for this type. We get to share some of the best .17 hmr rifles you could use starting today below.

1. Choosing the best bore snake

It is possible to find different products coming from different manufacturers all looking to sell their products. It would be important to pick the best bore snake for cleaning the rifle and pistol. The Hoppe’s product is often seen as the best and will get the job done easily. For those who have used it, they agree that it can help in replacing the tiresome use of the patch to clean the gun.

2. Apply the solvent onto the bore snake

As part of lubricating the bore snake, you need to apply the Hoppe’s solvent. Make sure to apply the solvent to the floss region found on the bore snake.

Proceed to drop the brass end into the breech of your pistol gun. The brass end should easily go through the pistol barrel and emerge on the other size. The first floss area on the bore snake will help remove the loose particles in the barrel.

3. Keep pulling the bore snake

​

Source: http://item.brownells.com/

You have to make sure that the whole length of the bore snake gets to go through the barrel. With the first floss part having removed the loose particles, the embedded bronze part will be important for scrubbing the residue in the barrel. The scrubbing is possible as the bronze part is made to work as a brush.

With the fouling and residue removed, the remaining part of the bore snake will now swab the entire length of the barrel. The best part about this process is that it can be done in a single pull of the bore snake through the barrel.

4. Finishing up cleaning

The first part was cleaning with Hoppe’s solvent, but now you get to clean without it as a way of finishing. Clean the barrel with the bore snake about twice without using the solvent this time.

By now you should see that the barrel is all cleaned up and still shining. The process is simple and anyone can do it. You can always now go ahead to shoot with confidence knowing that your gun is cleaned up and will work great.

Below is an important video that could help you to learn more about cleaning with a bore snake.

​Conclusion

Comparing cleaning a pistol with a bore snake to the conventional method of using a brush, you can see that a bore snake is always better. You can end up having the best-cleaned gun around when you choose a bore snake. Always make sure that you get the right bore snake at all times.

We all know how important gun triggers are. After all, it is the central platform that connects you, the user, to the weapon. Of course, you can expect that the best AR-15 triggers can do more than this.

If you think that triggers don't play a significant role in the accuracy of your shots, then you are completely wrong.

For most new guns, you will get that they come with an anodized coating important for protecting the gun from rusting. The problem is that the anodized coating blurs or scratches off with time. This leaves the top surface of the gun prone to issues of rust. When this happens, the gun will obviously not work as expected. It is then crucial that you get to know how to get rust off a gun if you want it to last longer.

So, how do you get to do that? We get to look some of the simple steps you can take when it comes to removing rust from your handgun.

What you’ll need

Instructions

1. Remove the surface rust sediments

The first common step would be disassembling the gun so that you can start working on it. If the rust has accumulated on the gun for a while, then it is not going to be easy to disassemble the gun. You need to remove the surface rust to break free some of the parts. By using dry cotton cloth, you can wipe off the surface rust, dirt, and salts. You always need to keep the gun dry at all times, it is reason you are to use dry cotton cloths to wipe the rust off the gun parts.

2. Separate the different gun components

Most of the time, the handguns would come made of polymer and steel parts. This calls for you to separate the two types of components, as they cannot be cleaned the same way. Some of the steel components in a gun include the magazines, the barrel, the recoil spring, barrel and the upper receiver.

If your gun comes with lower receivers and trigger housing made of polymer material, then you have to use copper wool to clean them instead of a copper brush. The brush on overall would be harder than the polymer; so using it will easily scratch the polymer material. A dry cloth should be enough for removing the surface rust sediments on the polymer parts.

Sometimes the rust would be a lot tougher to remove so there is the need to use a plastic scrub brush to make it happen. This is also great for removing the ingrained dirt on the polymer components. Using a toothbrush is often enough to remove the dirt and rust easily without leaving any damage to the polymer parts. You could add some warm water mixed with dish detergent as a way of cleaning the dirt easily.

After cleaning, you need to keep the polymer parts separated from the steel parts as a way of keeping the steel components dry always for removal of rust.

3. Cleaning the steel components

Source: https://www.calguns.net

For this part, you can now use the copper brush to remove the rust and dirt from the steel components. This is because steel is hard enough to take the action from the copper brush bristles. Scrub the surface of the components with rush a few times and shake out the brush before continuing. Wipe the scrubbed surface every few times after the scrubbing to remove the rust.

Sometimes you can have rust in crevices where the brush nor the wool would reach. This calls for using a copper pick for removing the rust in such places. You need to use the pick to gently remove the rust from the crevices. The ear swab could also come in handy to pull any rust particles remaining in the crevice.

Removing the rust from the crevices is going to be time-consuming job, but it will always leave your gun clean and free of rust.

With the cleaning done, you need to use some cleaning lubricants for the gun to help with removing any carbon and grit that might be still on the gun surface. The lubricants can be used on both the steel and polymer components.

4. Assemble the gun parts

Now that you are done with the cleaning part, you can proceed to assemble the parts to make a complete gun. You might be looking to store the gun once it is cleaned. Do not make the mistake that you did before with the storage that led to rusting in the first place. Make sure that this time you get to store in a dry place.

For those who own safes, make sure to buy a desiccant for the safe. The work of the desiccant is to help with removing the excess moisture in the safe to keep the environment dry.

Below is a quick video on removing rust off a gun you might want to consider using

Conclusion

The process of getting rust off a gun is simple and anyone can do it. What is important is that you get to store the gun correctly once you are done with the cleaning. Make sure that the next time you store a gun it is in a dry place. With proper storage, you will no longer have to worry about rust damaging your gun.